P295GH Pressure Vessel Steel Plate

Classification :

P295GH is a normalized pressure vessel steel to EN10028-2 with a minimum yield strength of 295 MPa. As with many of our other pressure vessel grades it is has excellent weldability.

emma@stainlesssteel-hh.com

RELATED PRODUCTS

ONLINE MESSAGE

Keywords:

P295GH Pressure Vessel Steel Plate

Product Introduction

A steel which is ideal for use in elevated working temperatures, grade P295GH is used in the fabrication of industrial pressure vessels and boilers. It is an EN10028 specified grade which governs steels used in pressurized service.

P295GH steel gives optimum performance for pressurized products that must support a creep limit greater than 155N/mm2 at 400ºC. It is a normalized steel and has excellent welding characteristics. It is used worldwide by fabricators serving the oil and gas industry and can be found in heat exchangers, weldable pressure vessels and boilers and pipework.

EN 10028
EN 10028 Part 2 & 3 is the euro norm specification for flat steel products intended for use in pressurized service. The specification covers non–alloy and alloys steels as well as weldable fine grain steels.
EN 10028 sets standards for steel used in weldable industrial boilers and pressure vessels. The specification has the same status of the old DIN and BS Standards which EN 10028 has now superseded.

offer EN 10028 specified boiler and pressure vessel quality steel from stock which is in most cases of China Origin – this is known for its superior quality. Our carbon steel plates come with mill certification and are stamped to provide full traceability. Alternatively, the customer can arrange testing via a third party testing house.

Technical Data

Chemical Composition of EN 10028 – P295GH

C	0.08 to 0.20	Cr	≤0.30
Si	≤0.40	Cu	≤0.30
Mn	0.90 to 1.50	Mo	≤0.08
P	0.025	Nb	≤0.020
S	0.015	Ni	≤0.30
Al	≤0.020	Ti	0.03
N	≤0.012	Vi	≤0.02

(Maximum values unless stated otherwise)

Mechanical Properties of EN 10028 – P295GH

Type	Thickness (mm)	Yield Strength MPa (min)	Tensile Strength MPa	Elongation % (min)	Impact Energy (KV J) (min)
Type	Thickness (mm)	Yield Strength MPa (min)	Tensile Strength MPa	Elongation % (min)	-20°	0°	+20°
Normalized	≤ 16	295	460 - 580	21	27	34	40
	16> to ≤40	290	460 - 580	21	27	34	40
	40> to ≤60	285	460 - 580	21	27	34	40
	60> to ≤100	260	460 - 580	21	27	34	40
	100> to ≤150	235	440 - 570	21	27	34	40
	150> to ≤250	220	430 - 570	21	27	34	40

(Minimum values unless stated otherwise)

Boiler Pressure Vessel Steel